Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

Preventing those problems can prevent aluminum alloy Cable tray from appearing in use

Release time:

2024-01-26

There is only one short circuit in the Cable tray supplier, and the cable at the fault is slightly damaged, but there will still be obvious marks

The equipment of aluminum alloy bridge has been clearly understood by many people, because it has played a considerable role in the field of construction.
However, in the long-term use, it will also have some minor problems, which will have a negative impact on our lives.
So do you know what will happen to the aluminum alloy Cable tray supplier?
Please come and have a look with Tian'an Bridge.
1.There is a short circuit in each part of the cable, which may cause the current relay on the distribution box to operate abnormally and the damage caused by the cable is very serious.
There is a short circuit inside the cable, which is usually caused by the poor quality of the cable, leaving no trace on the appearance.
The whole cable will be burnt out, maybe somewhere the cable will be burnt out, so that the cable will be seriously damaged at the fault.
There is only one short circuit in the Cable tray supplier, and the cable at the fault is slightly damaged, but there will still be obvious marks.
The cause of this problem may be due to excessive current or poor cable quality.
Machinery and equipment should be inspected and maintained regularly after use.
Then the maintenance method can refer to the following three points:
1.The motion state of the balance cylinder of aluminum alloy bridge equipment and the test of oil circuit and joint of lubricating oil lubrication system.
2.Friction often occurs between the bridge equipment slider and the guide rail, which should be adjusted as necessary, and the joint should be lubricated and piped checked to ensure normal operation.
3.Aluminum alloy bridge equipment regularly lubricate the gear parts: the gear transmission box and its interior are damaged due to frequent operation, and there is a greater possibility of loosening.
The problems mentioned above are easy to occur in the use of aluminum alloy bridge, we must pay attention to the use, including the problems mentioned above may also be caused by excessive current or poor quality of the bridge.
Everyone should operate correctly at ordinary times and do a good job in its routine inspection.

Keywords：

What are the usage and precautions of stainless steel cable tray?

On the structural strength change and material description of aluminum alloy Cable tray

What are the usage and precautions of stainless steel cable tray?

On the structural strength change and material description of aluminum alloy Cable tray