Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

Treatment method and wiring method of elbow of aluminum alloy cable tray

Release time:

2024-01-23

In the specific use process of cable tray vendors, specific operation needs to be carried out according to different materials, different types of anti-corrosion

In the specific use process of cable tray vendors, specific operation needs to be carried out according to different materials, different types of anti-corrosion and protection requirements.
In the actual operation process, due to the different installation environment, it is generally necessary to deal with the surface of the bridge, including the adhesion of part of the bridge, so that it will be stronger and have better corrosion resistance.
Aluminum alloy bridge elbow is a product process obtained by adding the product directly to the cable tray or after oleic acid treatment.
In addition, some related maintenance methods need to be done in daily life, only in this way, it can be more universal and widely used.
Aluminum alloy bridge elbow is a very important form, which can be maintained regularly every quarter.
In the process of specific use, it should be avoided in places with high temperature and high humidity.
At the same time, we should keep ventilated and dry.
At the same time, avoid contact with corrosive objects or liquids, including some alcohol or nail polish.
If necessary, we also need to standardize the operation.
Aluminum alloy bridge in the comprehensive wiring should pay attention to the following four points:
1.The design of the frame is reasonable to ensure the proper bending radius of the cable tray vendors.
When bypassing other grooves up and down, the turning slope should be gentle.
Note that both ends of the cable can cover the cover without damaging the cable.
2.In the process of wire release, we should mainly pay attention to the control of tension.
For cables packed with reels, it is recommended that at least one worker at both ends should be arranged to cover the reels on the self-made struts.
The workers at the end of the wire first pre-pull part of the cable from the drum box so that the collaborator can pull it out from the other end of the pipe.
The pre-drawn wires should not be too many, so as to avoid tangling and winding of multiple wires on the spot.
3.At the end of the traction process, the remaining redundant cables at both ends are arranged and protected.
The original direction of rotation should be followed when winding, and the diameter of the coil should not be too small.
4.When arranging, binding and placing cable tray vendors, redundant cables should not be too long, coils should be wound according to the trend, and fixed cables should not be too tight.

Keywords：

Under what environment is stainless steel cable tray usually used?

Twelve rules for the wiring of stainless steel cable tray

Under what environment is stainless steel cable tray usually used?

Twelve rules for the wiring of stainless steel cable tray