Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

What is the special cleaning method for punching cable tray

Release time:

2024-01-10

I believe you are very familiar with the cable tray products, and the cable tray, as one of them, is also widely used in the perforated cable tray laying project, so what problems

I believe you are very familiar with the cable tray products, and the cable tray, as one of them, is also widely used in the perforated cable tray laying project, so what problems should be paid attention to when cleaning the special cable tray?
Next, we cable tray manufacturers will introduce them to you one by one.
When cleaning the special bridge for cable, you can not choose corrosive solvent or wipe with metal wire, which may leave scratches and beautiful scenery. If you use solvent for cleaning, clean it with clean water to prevent it from invading the structure.
Special bridge for cable can also be scraped with tools when cleaning, but bamboo or plastic chips with lower hardness should be used to avoid scratching the surface. When scrubbing, soft materials such as sweat cloth can be used to wipe.
The salt frost should also be removed in time for the FRP cable tray, and the ship sailing in the sea area should remove the salt frost attached to the surface in time, otherwise it will accelerate the aging speed of the FRP cable tray.
If the stain on the special cable tray is difficult to remove after all, you can choose gasoline, kerosene, diesel and so on for cleaning, but rinse with water immediately after cleaning to prevent intrusion into the interior.
Daily knowledge of trough cable bridge maintenance: when cleaning the trough cable bridge, you can wipe the dust on the surface with a dishcloth, and do not wipe the surface of the trough bridge with wet cloth or acidic products, otherwise the corrosion performance of the bridge may become worse and worse.
If the trough perforated cable tray is used for a long time, the surface luster will be darkened, and it can be polished with polish wax, which can not only optimize the aesthetics of the cable tray, but also improve the oxidation resistance of the cable tray surface.
When repairing the cable tray, it is necessary to spray anticorrosive paint on the surface of the bridge, which can effectively strengthen the anti-corrosion working life of the bridge.

Keywords：

The installation and use of cable tray must meet the technical standards

Analysis of several matters needing attention in the wiring of cable bridge

The installation and use of cable tray must meet the technical standards

Analysis of several matters needing attention in the wiring of cable bridge