Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

The cable tray supplier explains the key points in the maintenance process.

Release time:

2024-01-09

Test and check the operation status of the balance cylinder of cable tray equipment and the oil circuit and joint of its oil

In our daily use of cable tray, a good maintenance method is very important, so what are the main maintenance points in the maintenance process and what details need to be paid attention to?
Key points and matters needing attention in bridge maintenance: the main points of cable tray maintenance are as follows:
1.Daily maintenance: regularly wipe off traces of dust on the surface with a cable tray elbow supplier soft cloth.
two。
2.Regular maintenance: wipe the exterior evenly with a special wax polish and polish it with a clean soft cloth for a while to make it rotate flexibly, prevent rust and resist oxidation.
As usual, it can be maintained quarterly.
Hardware and metal handles can be wiped and dried with less oil to prevent moisture.
After the soft cloth erases the dust marks from the outline.
3.Clean soft cloth and special maintenance wax should be used.
Key points and matters needing attention in bridge maintenance: pay attention to the details of cable tray elbow supplier trough during maintenance: in the daily maintenance process of cable tray, it is necessary to avoid using wet cloth and hard objects to wipe paint, mirror and glass.
Avoid contact with acidic, alkaline chemicals and greasy substances.
Keep the room ventilated and boring.
The cable slot should be placed in a hot and humid place.
Avoid surface contact with corrosive liquids such as alcohol and nail polish.
All machinery and equipment should be inspected and maintained regularly after use.
Cable tray manufacturers will talk about how to repair and maintain cable tray equipment.
1.Test and check the operation status of the balance cylinder of cable tray equipment and the oil circuit and joint of its oil lubrication system. two。
2.The friction between the slider and the guide rail of the cable tray equipment is frequent, so necessary adjustment and alignment should be made, and the lubrication quality and pipeline of the connecting parts should be checked to ensure good operation.
3.Regularly lubricate the gear part of the cable tray equipment: the gear box and its internal parts are more likely to be damaged and loose due to frequent operation.

Keywords：

The main mode of production of cable tray

Required configuration of supports and hangers for trough cable tray

The main mode of production of cable tray

Required configuration of supports and hangers for trough cable tray