Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

What problems will be encountered in the use of slot Cable tray?

Release time:

2024-01-05

the possible defects: all parts of the alloy cable tray show the appearance of a short circuit, which may form the operation of the current relay on the distribution

As an intelligent weak electricity system, cable tray manufacturers play an important role in our usual life.
But it will always show problems, causing confusion to our lives.
Do we know what is wrong with the cable tray?
First, the possible defects: all parts of the alloy cable tray show the appearance of a short circuit, which may form the operation of the current relay on the distribution cabinet, which will cause serious damage to the cable; second, the defects that will appear: there is a short circuit inside the cable, which is usually caused by the low quality of the cable, and there is no trace on the outside.
Third, it may show that the whole cable is burned or somewhere, so that the cable is seriously damaged at the fault; fourth, the problem that may appear is that there is only one short circuit in the cable tray and the cable is slightly damaged in the hairy place. but there will still be obvious marks.
Such problems may occur because the current is too high or the quality of the cable is too poor.
All the mechanical equipment should be inspected and maintained regularly after use, and the cable tray manufacturers will talk about how to overhaul and maintain the cable tray equipment.
1. The operation status of the balance cylinder of the cable tray equipment and the test and inspection of the oil circuit and joints of the oil lubrication system of the cable tray equipment. 2. The friction between the slider of the cable tray equipment and the guide rail is relatively frequent, so necessary adjustments should be made to check the lubrication quality and pipeline of the joint to ensure good operation.
3. Lubricate the gear parts of the alloy cable tray equipment regularly: the gear box and internal parts are more likely to be damaged because of frequent operation, and there is a greater possibility of loosening.

Keywords：

Galvanized cable tray suppliers remind installation of bridge tray to pay attention to 3 points

What matters should be paid attention to in the grounding of galvanized cable tray

Galvanized cable tray suppliers remind installation of bridge tray to pay attention to 3 points

What matters should be paid attention to in the grounding of galvanized cable tray