Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

How to avoid the corrosion of aluminum alloy cable tray by the outside world

Release time:

2023-12-26

With the continuous progress of today's society, the number of cable bridges is also increasing, so do you know how to avoid the external

With the continuous progress of today's society, the number of cable bridges is also increasing, so do you know how to avoid the external erosion of the bridges?
Next, the aluminum alloy bridge manufacturer will give you a detailed introduction.
1. Separate different types of cables.
Different types of cables have different widths and even different rated voltages, which will inevitably cause fire due to heat dissipation and other problems in use.
Therefore, different types of cables should be laid from top to bottom in the order of high voltage cable layer, power cable tray elbow supplier and control cable layer.
two。
2. Sealing the hole of cable through the wall with fireproof material is a fire protection design method often adopted by bridge manufacturers, and it is also a simple method, which can also prevent air leakage from the wall.
3. Aluminum alloy cable tray is not only the equipment for managing cables, but also the equipment for protecting power consumption.
Cable tray manufacturers should fully consider the requirements of the use environment and carry out reasonable fire protection design.
4. The maintenance of cable bridges installed outdoors, especially in the wilderness, is troublesome.
It is suggested that people need to be exposed to all kinds of natural weather outdoors and in the wilderness.
In addition, the current environment is bad and the corrosion is serious.
When repairing the bridge, whether the screws on the bridge are loose, whether the important connection parts are corroded or rusty, etc.
Is everything that should be fixed.
In addition, whether the cable tray elbow supplieron the bridge is intact and whether the transmission process is smooth is also within the scope of maintenance.
I hope the relevant staff will not be negligent.
5. Before starting production, workers should check the power supply, switches and other components to ensure that everything is normal and that the power supply has no signs of moisture before production.
In the process of production, workers should pay attention to the pointers and lines on the equipment at any time to avoid power outages and other power accidents.
6. For bridges installed indoors, maintenance should also be carried out, the important thing is installation stability, fire and flame retardant and so on.
As the indoor environment is relatively simple, hidden dangers are relatively less, workers are easier to overhaul.

Keywords：

Why does the appearance of hot-dip galvanized cable tray blister

Points needing attention in the installation process of aluminum alloy cable tray

Why does the appearance of hot-dip galvanized cable tray blister

Points needing attention in the installation process of aluminum alloy cable tray