Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

How to check if there is a problem with the cable tray

Release time:

2023-12-25

What are the defects of the bridge? first, perhaps the defects: all parts of the bridge appear short-circuit appearance

As an intelligent weak current system, bridge plays an important role in our usual days.
But it always has defects, which confuse our days.
What are the defects and maintenance items that will occur in that bridge?
What are the defects of the bridge? first, perhaps the defects: all parts of the bridge appear short-circuit appearance, such defects may constitute the operation of the current relay on the distribution cabinet, and the damage to the bridge is very serious.
Defects that will occur: there is a short circuit inside the bridge, this kind of defect is generally caused by the low quality of the cable, and there is no trace on the outside; maybe the whole cable will be burned or somewhere will be burnt, so that the cable is severely damaged at the defect; fourth, the defect that may appear is that the bridge needs only a short circuit, and the cable at the defect is slightly damaged, but there will still be obvious marks.
Such defects may occur because the current is too large or the alloy cable trayquality is too poor.
Bridge maintenance items 1, bridge equipment balance cylinder operation and oil lubrication system oil circuit, connection number inspection.
The conflict between the bridge equipment slider and the guide rail is relatively repeated, so necessary adjustments should be made to check the lubrication quality and piping of the joint to ensure excellent operation.
Punctual lubrication for the gear parts of bridge equipment: the gear box and internal parts are more likely to be damaged and loose because of frequent operation.
When there is noise in these parts, it can be lubricated first, and then according to the vibration, check the oil output and pressure of the oil injection points between the systems, and make appropriate adjustments.

Keywords：

Under what circumstances is it necessary to use stainless steel Cable Tray bridges in an environment with fire protection requirements

Introduction to the advantages of hot-dip galvanized cable tray

Under what circumstances is it necessary to use stainless steel Cable Tray bridges in an environment with fire protection requirements

Introduction to the advantages of hot-dip galvanized cable tray