Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

Three common installation methods of stainless steel cable tray

Release time:

2023-12-20

Stainless steel bridge is a kind of bridge with high corrosion resistance

Stainless steel bridge is a popular bridge in the market, which is closely related to the technological principle of stainless steel.
Stainless steel bridge is a kind of bridge with high corrosion resistance.
The reason for the corrosion resistance of stainless steel bridges is that stainless steel materials Cable tray supplier various rare elements.
Stainless steel bridge has the advantages of strong corrosion resistance to sulfuric acid, nitric acid and alkali, high bearing capacity, high tensile strength and good mechanical properties, so that the industrial cable in special environment has good anti-corrosion protection, laying and installation is more perfect.
Therefore, for enterprises that buy corrosion-resistant bridges, stainless steel bridges are a good choice!
In addition to these advantages, there are also many installation methods of stainless steel bridge.
The following three types are mainly introduced: 1.
The top of the stainless steel bridge cabinet is installed in the actual installation of the data center, and the hanger cannot be installed because the floor is too high, the top structure is special, or the owner does not want to damage the ceiling.
In this case, the cabling rack can be installed on top of the cabinet.
The top bracket is fixed with the cabinet by bolting, and there is no hole in the top of the cabinet.
The mounting height of the bracket is arbitrary.
The bottom distribution frame is generally higher than the top 150mm~200mm of the cabinet.
The actual height needs to take into account the overall situation of the computer room and give priority to ensuring the wiring space above the wiring frame.
It should be noted that all cabinets should be in place this time, and the distance between cabinets should not be too large, resulting in excessive span of cable racks and waist collapse.
It is not easy to adjust the cabinet after installation.
two。
At present, the hoisting of stainless steel bridge ceiling is very popular in the integrated cabling of data center.
The wiring frame is convenient for maintenance, heat dissipation, air conditioning, ventilation, rodent protection and waterproof.
Full consideration should be given to the installation of headroom height, lamps, fire protection, air ducts, beams and columns in the design.
It is suggested that a set of hanger should be installed on the upper distribution frame every 1.5m, and the specific span should also be calculated according to the actual load.
When the local high load, the hanger density should be increased.
When installing double-layer distribution frame, the vertical distance between strong and weak distribution frame should be more than 300 mm.
Limited by the net height of the top, the strong and weak distribution frame can be installed on the same plane, and the horizontal distance is ≥ 150mm.

Stainless steel bridge ground support installation ground support installation is to install the distribution frame on the ground, which is generally used for outdoor base stations.
When the machine room is unconditionally suspended and the equipment is not in place, the distribution frame can fix the wall end and the ground.
If the electrostatic floor is installed in the computer room, holes should be drilled on the electrostatic floor to make the post take root and be fixed with the ground.

Keywords：

What are the main structures of fireproof Cable tray bridges?

On the classification of cable tray

What are the main structures of fireproof Cable tray bridges?

On the classification of cable tray