Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

Advantages and uniqueness of Open Cable Tray

Release time:

2023-12-19

When it comes to the open bridge, we need to introduce to you the

When it comes to the open bridge, we need to introduce to you the originator of the open bridge: the French company Cabofi CABLOFIL.
As early as 1972, it was the first to launch an open grid bridge in the French market, and because it had a patent for this new product at that time, it monopolized the open bridge of the entire European market in the early 1990s.
Until now, Capofie still has more than half of the market share in the open grid bridge market in Europe, especially in France, where it originated.
Capofi is an expanding global company that introduces this new type of open bridge to the local market every time it goes to a new place.
Therefore, this new type of bridge is not only widely used in Europe and the United States, but also has more and more users in the Asia-Pacific market in recent years, especially in data centers and computer room projects.
So why did this open bridge get such a good development?
There must be a reason why it is so widely used.
The following editor introduces to you the advantages and uniqueness of the open bridge:
First of all, the open grid bridge makes all the cables visible, so that the quality of the wiring project can be fully controlled. In case of failure in the future, the problem cables can be quickly identified and corresponding measures can be taken.
Second, the open grid format bridge allows to go out of the line from any point, which can be easily connected with the cabinet and rack, and can change the exit point at will; the ordinary wire slot must be drilled in the outlet point, and it is difficult to change.
Third, the open bridge is very convenient to use in the computer room, because the cable in the computer room moves, increases, decreases and changes very frequently, and it is often upgraded and expanded.
If a wire slot is used, where the two bridges are connected, there are at least 8 screws and nuts for each interface, or 16 at most. If you want to make any changes, you must first screw the screw nuts and remove the cover plate; after the modification is completed, the cover plate must be installed again.
Cabofie net format bridge is a completely open structure, which can change the cable tray elbow supplier directly.
Another big trouble in using wire slots is that all kinds of elbows, tees, four links, diameter changes, elevation changes and other transition parts need to be carefully measured and specially customized in the factory. All these transition parts of Cabofi are cut and processed directly on the site, and any installer can master the method of cutting through a simple training of ten minutes.
In fact, the open bridge has some other innovations and unique features, such as quick installation system, direct clamping bracket and bridge, patented quick connectors, quick connection of two bridges without screws and nuts, and so on. all help us to complete the installation quickly and save time.

Keywords：

What is the function of installing cable tray

How to set the slope of cable tray reasonably

What is the function of installing cable tray

How to set the slope of cable tray reasonably