Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

How to set the slope of cable tray reasonably

Release time:

2023-12-19

when we build the whole Cable tray supplier system

The reasonable setting of the bridge slope will also have a certain impact on the whole system in the later stage, so it is necessary for us to control the slope reasonably when we build the whole Cable tray supplier system.
Next, we will give you a detailed analysis of the slope.
If you want to make the climbing height of the bridge on the spot, half of it is two kinds, one is lofting, which can be carried out according to a certain proportion on the CAD, and if the drop is not very large, you can also make the lofting on the flatter ground around us. We can also cut the bridge into an angle of 45 °and then cut it to the length we want. After cutting a 45 °is what we want to look like.
However, it should be noted that if it is a bridge with two or more stories, the decreasing method should be used, that is, the upper side of the lower bridge should be the same as the lower side of the upper bridge, which can ensure that the distance between the upper and lower layers of our climbing section is the same as that of the horizontal section. if it is greater or less, the spacing cannot be guaranteed to be the same.
From here we can see that the slope has a great impact on the whole system, and the reasonable setting is not complicated.
For more questions about slope and construction, you can communicate with our online customer service or contact us directly!

Keywords：

Advantages and uniqueness of Open Cable Tray

What problems should be paid attention to when the non-embroidered steel cable tray is grounded?

Advantages and uniqueness of Open Cable Tray

What problems should be paid attention to when the non-embroidered steel cable tray is grounded?