Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

Bridge cable laying and installation-safety and fire protection measures

Release time:

2023-12-14

All construction personnel must wear safety helmets and insulated

1. All construction personnel must wear safety helmets and insulated shoes when entering the construction site.
2. When working at a height of more than 2 meters, you must fasten your seat belt.
When working on the scaffolding, both ends of the probe board must be fixed firmly.
The work on the ladder should be attended by special personnel and have reliable anti-skid measures.
3. Smoking is strictly prohibited in on-site construction, and all kinds of oil and paint should be stacked according to the prescribed place and specially attended by special personnel.
4. Live work should be carried out by more than two people, wear insulated shoes, prevent electric shock, and prepare safety equipment.
5. To participate in the commissioning staff should always be carried out by more than two people, wearing all kinds of protective equipment to ensure safety.
If there are problems in debugging, cut off the power supply first, and then check the condition of the equipment.
6. The power transmission test must be carried out by more than two people. after confirming the switch to be powered on, it will be operated by a special person, monitored by one person and followed by a unified command.
7. In the power transmission and debugging work, it is strictly forbidden for non-debugging personnel to construct again, and the debugged equipment should warn the irrelevant personnel not to move at will.
8. When using mechanical drilling, it is strictly forbidden to wear gloves or hand-held workpieces.
Insulation checks should be carried out frequently for tertiary power distribution boxes and hand-held power tools.
9. The storage and use of electric welding, oxygen and acetylene shall be centralized in accordance with the regulations, and must be equipped with fire extinguishing equipment.
When using electric welding, the wire and ground wire should be double-wire in place, do not use metal components as ground wire, and operate in accordance with the regulations.

Keywords：

Construction of bridge cable laying and installation-acceptance standard

What is the national standard thickness of aluminum alloy cable tray?

Construction of bridge cable laying and installation-acceptance standard

What is the national standard thickness of aluminum alloy cable tray?