Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

There are several ways to fix the cover plate of cable tray

Release time:

2023-12-11

There are five common ways to fix the cover plate of cable tray: pressing plate fixing

There are five common ways to fix the cover plate of cable tray elbow supplier: pressing plate fixing, screwing fastening, clasping fixing, padlock fixing and seven-shaped buckle fixing.
I would like to introduce to you the five common ways to fix the cover plate of cable tray.
The main contents are as follows: 1. the pressure plate is fixed by punching holes in the cover plate of the cable bridge, pressing the pressure plate on the cover plate, and fixing the cover plate and the tray together through screw perforation.
The pressing plate is fixed no matter whether the bridge is installed horizontally or vertically.
2. Screw fastening method the cover plate of the cable tray is punched, and the cover plate and the tray are fixed together by the rotating plate of the screw buckle.
The screwing and fastening method is suitable for horizontal or vertical installation of the bridge.
3. Buckle fixing method cable tray cover plate does not need to be punched, and the cover plate and tray are fixed together by bending folds at both ends of the buckle, and the fixing strength is limited.
The buckle fixing method is only suitable for the horizontal installation of the bridge, and the vertical installation cover plate of the bridge is easy to slip off from the tray.
4. Padlock fixing mode cable tray cover plate is welded with padlock hook piece, bridge tray is welded with padlock main body, and the cover plate and tray are fixed together by padlock rotating ring.
The padlock fixing method is very strong, suitable for horizontal or vertical installation of the bridge, and also suitable for outdoor windy environment.
5. the seven-shaped buckle is fixed by punching holes in the cable tray tray, the lower end of the seven-shaped buckle is pierced, and the upper end of the seven-shaped buckle is fixed on the cover plate by tightening screws, so that the cover plate and the tray are fixed together.
The fixing method of the seven-character buckle is also very strong, and the fixed position is very flexible, not as rigid as the fixed position of the padlock.

Keywords：

Application of Cable Bridge in engine Room of Diesel Generator set Factory

How long is a section of cable tray?

Application of Cable Bridge in engine Room of Diesel Generator set Factory

How long is a section of cable tray?