Professional Cable Tray Manufacturer

Shandong Hongfeng Electric Group Co., Ltd.

The products can be widely used in construction, energy, power, plant.

What is the allowable deviation of the national standard for the thickness of cable tray?

Release time:

2023-12-08

The thickness of the trough cable tray includes the pallet thickness, the cover plate thickness and

The thickness of the trough cable tray includes the pallet thickness, the cover plate thickness and the connecting plate thickness.
The thickness of steel tray is 1.0mm, 1.2mm, 1.5mm, 2.0mm and 2.2mm, and the thickness of aluminum alloy tray is 1.2mm, 1.5mm, 2.0mm, 2.2mm and 2.5mm.
The thickness of ladder cable tray includes the thickness of side plate, the thickness of rung and the thickness of connecting plate.
The side plate thickness of steel ladder cable tray is 1.0mm, 1.2mm, 1.5mm, 2.0mm and 2.2mm.
The thickness of zinc layer on the surface of ladder galvanized cable tray is thick and thin, the thickness of thin zinc layer is greater than or equal to 12 microns, and the thickness of thick zinc layer is greater than or equal to 65 microns.
The common national standards for bridge thickness include JB/T 10216-2000 cable tray standard for electronically controlled distribution (abbreviated as 2000 standard) and JB/T 10216-2013 cable tray standard for electronically controlled distribution (abbreviated to 2013 standard). 2000 standard is suitable for outdoor hot-dip galvanized cable tray thickness requirements, 2013 standard is especially suitable for indoor cold-dip galvanized cable tray thickness specification.
Now cable tray manufacturers basically follow two thickness standards.
2000 standard requires that the width of steel bridge is less than 100mm, and the minimum thickness deviation of tray and cover plate can not be less than 1.0mm; the width of steel bridge is greater than 800mm, and the minimum thickness of tray and cover plate can not be lower than 2.5mm.
2013 standard requires that the width of steel bridge is less than or equal to 150mm, the minimum thickness deviation of pallet and cover can not be less than 1.0mm, the width of steel bridge is greater than 800mm, and the minimum thickness of tray and cover can not be lower than 2.2mm.

Keywords：

What is the national standard thickness of the cable tray? The latest thickness standard

What are the common thickness standards for galvanized coating of cable tray?

What is the national standard thickness of the cable tray? The latest thickness standard

What are the common thickness standards for galvanized coating of cable tray?